No leakage of oil at shaft bearings. With contec Oil Mist Separators (COMS).

Clean air for clean energy generation.

 
 

Product name

Oil Mist Separator Type 7.500/762, Flow rate 710 Nm³/h

Contec® Oil Mist Separator/Oil Mist Eliminator Type 7.500/762, Flow rate 715 Nm³/h
COMS-Type:

COMS-Type 7.500/762, Flow rate 710 Nm³/h

Application:

Installation of the Oil Mist Separator on:

  • Lubrication oil systems (LOS) of gas and steam turbines
  • Vacuum pumps
  • Rotating machines
  • Compressors
  • Large-scale compressors
  • Crankdrives
Task:

Technical task:

  • Filtering, separation and regaining high-quality lubrication oil including all its additives

Operational task:

  • Avoiding oil leakage (at bearings etc.) by creating a permanent slight negative pressure in the lube oil system

Global/environmental task:

  • High-efficiency filters prevent the emission of oil mist into the atmosphere
  • Protecting the environment by reducing oil mist emission down to < 3-8 mg/m³, cleaner than the German TA regulations of clean air and long­term protection of the environment
Advantages:
  • High quality based on 25 years of experience and multiple well-tested and proven technology
  • Modular system allows a simple constructional adjustment to the respective application
  • Rapid and long-term supply of spare parts
  • Long service life and easy change of the filter elements
  • Automatic oil recycling system
  • Environmental Technology Price for 1990
  • Project-specific planning and construction
  • Various options
Options:

Explosion-proof versions/ATEX

  • Explosionsgeschützte Varianten/ATEXThe complete Contec Oil Mist Separator is certified in compliance with EC directive 94/9/EG (ATEX 100a) and can be operated in hazardous areas
  • Up-to-date in terms of state of the art safety technology
  • Suitable for application in explosive gas atmospheres category 2 and 3 (group II)
  • If requested taylor-made configuration in accordance with the ATEX directives for zone 1 (explosive atmospheres are likely to occur) or zone 2 (seldom and short-term explosive atmospheres) group IIC (propane, ethylene, hydrogen)
  • Drives Ex-pressure resistant, VIK, special voltages etc.

Redundant Series

  • Redundante VariantenRedundant motor/blower unit on bracket or frame construction
  • Motor/blower units are controlled separately by hand and check valves
  • Motor/blower unit can be dismantled easily due to hard valves before and after blower
  • Easy maintenance due to laterally reversed construction of motor/blower units

Bypass

  • BypassComplete bypass with integrated check valve
  • Compact integration of a bypass system that is normally installed separately to the OMS/OME
  • „Emergency“-bypass to avoid over pressure in the LOS

Bypass of external air

  • FremdluftumgehungHand valve for admixing system-internal, purified exhaust air to control the negative pressure
  • Suitable for applications in Zone 1 hazardous areas or in areas with very dirty or polluted environmental air

Additional micro filter head piece

  • Zweite FilterstufeAdditional downstream air filter cell H11 for aerosol-free exhaust
  • Reduction of oil aerosols in the exhaust air to less than 2 mg/m³

Series without an blower

  • Baureihe ohne GebläseFilter system without motor/blower unit
  • Filtration and separation of oil mist for lubrication systems with sufficient positive pressure

Request a project now

Jochen Lehmkuhl

Technical advice
Oil mist filtration

+49 (0)2224 9893-15
lehmkuhl[a]contec-filtration.de

lehmkuhl[a]contec-filtration.de

Filtration is a living profession and almost based upon experienced data. By telling us your specifications, you take an active part in finding the best possible solution for your application.

Technical specifications
Request
Please…
Your message to CONTEC GmbH
Contact data
Data privacy

Note: You can revoke your agreement at any time for the future by e-mail to info[at]contec-filtration[dot]de Detailed information on the handling of user data can be found in our data protection declaration.

CAPTCHA
We would like to avoid automated SPAM. Please do the sum to confirm your online request is genuine. Thank you for your understanding!
2 + 8 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Verena Fromm

Ordering spare parts
Oil mist filtration

+49 (0)2224 9893-22
fromm[a]contec-filtration.de

fromm[a]contec-filtration.de

Contact data
Spare Parts

 

Request
Please…
Your message to CONTEC GmbH
Data privacy

Note: You can revoke your agreement at any time for the future by e-mail to info[at]contec-filtration[dot]de Detailed information on the handling of user data can be found in our data protection declaration.

CAPTCHA
We would like to avoid automated SPAM. Please do the sum to confirm your online request is genuine. Thank you for your understanding!
1 + 6 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

General request

+49-(0) 22 24 . 98 93-0
info[a]contec-filtration.de

info[a]contec-filtration.de

For your questions, suggestions and comments please contact us.

Contact data
Your message to CONTEC GmbH
Data privacy

Note: You can revoke your agreement at any time for the future by e-mail to info[at]contec-filtration[dot]de Detailed information on the handling of user data can be found in our data protection declaration.

CAPTCHA
We would like to avoid automated SPAM. Please do the sum to confirm your online request is genuine. Thank you for your understanding!
5 + 7 =
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.

Product video

COMS - how it works
You might also be interested in
Similar products
Accessories
  • Spare filter elements
  • O-Ring seal for housing cover
  • Air suction filter
  • Motor/blower unit

Contact

contec GmbH Industrieausrüstungen
Heideweg 24
53604 Bad Honnef
Germany

P. +49 (0)2224 9893-0
F. +49 (0)2224 9893-20